Affiliate disclosure: Some links on this page are affiliate links. If you buy through them we earn a small commission at no extra cost to you. This never affects our recommendations. Read our editorial policy →
Perlight PowerPlug+ MAX 930
Verdict: yes, this exact kit is socket-legal. It is listed Compliant on the ENA G98 Type Test Register under the Plug-in Solar device type (reference PERLI/21645/V1/A2, listed 3 October 2026), which is the listing that lets you plug it into a normal 13A socket yourself under SI 2026/848. No electrician and no Part P is needed. The newer PowerPlug+ generation on an APsystems inverter. It was listed non-compliant in late September and withdrawn, then re-listed compliant on 3 October under a new reference, so always quote the current reference.
Last checked: 10 October 2026. Register data from the ENA API (pulled 10 October 2026).
Quick Facts
- Register reference:
PERLI/21645/V1/A2, listed 3 October 2026, status Compliant - Registered capacity: 0.8 kW (the AC output limit, not the panel watts)
- Battery: none in the registered configuration. Battery kits are outside the socket route
- Price: no checked price for this exact kit
What is in the kit
- Panels: 2 x 465W panels
- Inverter: Altenergy (APsystems) 0.799 kW inverter, ref ALTEN/12127/V1/A1
- Battery: no
Register string: Perlight PowerPlug+ MAX 930 - PLM-PPM-M2-930. Only the configuration in that entry is covered: swap the panels or inverter and you are outside the listing. Anything not listed above, such as cable length or panel dimensions, is not in the register and we have not verified it.
Where to buy and price
Sold via: Via Plug In Solar (pluginsolar.co.uk). We have not recorded a checked price for this exact configuration, so we do not quote one. The brand page lists indicative prices for the range.
Rough annual savings
| Case | Saving a year |
|---|---|
| London, home most of the day (75% used) | ~£170 |
| Manchester, out all day (30% used) | ~£60 |
Method: the site's standard assumptions from How Much Can You Save: a south-facing 800W system generates 860 kWh a year in London and 756 kWh in Manchester, priced at the Ofgem cap of 26.32p/kWh. We scale to this kit's panel watts (930W), and because the inverter is limited to 800W, panels above about 930W add only a few pounds. These are estimates, not a quote. Unused generation earns nothing, because plug-in solar does not qualify for the Smart Export Guarantee.
Run your own numbers: the payback calculator takes your postcode, orientation and usage, and the savings calculator gives a location-accurate generation estimate.
Installing it
Plug it into a standard 13A socket and register it at myplugin.solar within 28 days (about two minutes). One plug-in solar device per household, 800W maximum. Registration replaces the old G98 form for a compliant kit, and the DNO checker tells you which route applies. How notification works.
See also
FAQ
Q: Is the Perlight PowerPlug+ MAX 930 legal to plug into a socket?
A: Yes. PERLI/21645/V1/A2 is listed compliant as a Plug-in Solar device on the ENA register as of 10 October 2026. Register it at myplugin.solar after installing.
Q: Does the Perlight PowerPlug+ MAX 930 include a battery? A: No. The registered configuration is solar-only. Battery kits are excluded from the socket route.